.net VS2013

Solving Blend 2013 interactivity error

I am playing with Blend 2013 Silverlight Sketchflow for creating web application mockups. Recently I’ve stumbled into an curios error when adding interactivity to a button.

Here is the repro:

Create two screens, and a button on a screen. So far so good. Right click on that button and select Navigate To/Screen 2. Blend will add a navigational behavior, like:

    <i:EventTrigger EventName="Click">
TargetScreen="SilverlightPrototype2Screens.Screen_1"/> </i:EventTrigger> </i:Interaction.Triggers>

It will underline pi:NavigateToScreenAction with a red squiggle as well complaining that type NavigateToScreenAction from assembly Microsoft.Expression.Prototyping.Interactivity is built with an older version of the Blend SDK, and it is not supported in Silverlight 5 projects.

A puzzling error. After playing around I discovered that the problem is with the referenced System.Windows.Interactivity assembly. Somehow Blend added a reference to a version instead of

Not sure what triggered the referencing of the wrong version but the solution is quite simple. Just remove it (in both projects) and reference the proper version. And Blend application sparks to life again.

.net Profiling Red Gate

Investigating why an instance is kept alive in a .net application

Sometimes, when I want to verify .net memory management behavior, I fire up ANTS Memory Profiler and run it on a test application just to see how memory management behaves.

So today I went and created this application

class Program
    static void Main(string[] args)
        A a = new A();
        B b = new B { Pointer = a };
        b.Pointer = null;
        b = null;
        a = null;
        a = new A();

class A


class B
    public A Pointer;

The ReadLine calls allow me to hit the “Take Memory Snapshot” in profiler. Later I examined these snapshots, specially the one between One and Two. What would you expect, how many instances are alive at that point? I’d say one, the instance of class A (referenced by a).

However, the profiler was showing, surprisingly, two. According to it, both an instance of A and an instance of B, were still very much alive. This result surprised me. Even more surprisingly, after Four there was still an instance of B around. How is this possible? There are no references to b and it is pointing to null. A bug in Memory Profiler? Hardly possible.

Right before I was going to post a question on RedGate’s forum I decided to check the IL code. With .net reflector of course. Immediately I saw the reason for that odd behavior. Can you spot it?

.method private hidebysig static void Main(string[] args) cil managed
    .maxstack 2
    .locals init (
        [0] class ConsoleApplication213.A a,
        [1] class ConsoleApplication213.B b,
        [2] class ConsoleApplication213.B b2)
    L_0000: nop 
    L_0001: newobj instance void ConsoleApplication213.A::.ctor()
    L_0006: stloc.0 
    L_0007: newobj instance void ConsoleApplication213.B::.ctor()
    L_000c: stloc.2 
    L_000d: ldloc.2 
    L_000e: ldloc.0 
    L_000f: stfld class ConsoleApplication213.A ConsoleApplication213.B::Pointer
    L_0014: ldloc.2 
    L_0015: stloc.1 
    L_0016: ldstr "One"
    L_001b: call void [mscorlib]System.Console::WriteLine(string)
    L_0020: nop 
    L_0021: call string [mscorlib]System.Console::ReadLine()
    L_0026: pop 
    L_0027: ldloc.1 
    L_0028: ldnull 
    L_0029: stfld class ConsoleApplication213.A ConsoleApplication213.B::Pointer
    L_002e: ldnull 
    L_002f: stloc.1 
    L_0030: ldstr "Two"
    L_0035: call void [mscorlib]System.Console::WriteLine(string)
    L_003a: nop 
    L_003b: call string [mscorlib]System.Console::ReadLine()
    L_0040: pop 

For some reason, compiler decided to allocate two references for class B: local variables b and b2. When the instance of class B is created it is stored in b2. After the Pointer property is assigned the same reference is stored to b while b2 isn’t set to null. Then when b is set to null, the b2 is still very much alive and thus keeping the instances count for class B to 1 – even though b is null and there are no other C# variables for referencing instances of B.

Mystery solved.  The lessons learned are that compiler might generate code one wouldn’t expect and that profiling memory isn’t always black and white. Those 50 shades of gray happen as well. IOW experience and good understanding of .net is a necessity.


When .net assemblies aren’t properly versioned odd errors happen

Today I’ve upgraded a SignalR library from 1.x to 2.0 in an MVC 5 (server) and WPF (client) projects I am developing. The upgrade itself went smooth but afterwards the client started yielding odd errors and refusing to connect anymore. It was yielding an exception saying something like Transport Connection time out (I can’t remember the exact message). Since it was a rather simple upgrade this error made no sense. Google didn’t help much either.

So I went debugging.


First step is to create a simple repro sample – a solution with a basic server and a console client (see attached zip).

Second step is to turn on SignalR tracing on client:

hubConnection.TraceLevel = TraceLevels.All;
hubConnection.TraceWriter = Console.Out;

Armed with these two steps I was able to get an error that made a bit more sense although it was even more bizzare.

18:43:53.9073548 – null – ChangeState(Disconnected, Connecting)
18:43:55.4913444 – b8fd1874-483d-4d89-8a69-c2cfe33cf946 – WS Connecting to: ws://localhost:53705/signalr/connect?transport=webSockets&connectionToken=0dQ3scw2aJ7RbXuUsTfa4wlY%2FJlMzW%2FVL1sVb%2FyswewEO8n4qAth7Erpt0ga0laLV%2B8BCD833lZZy1MblOe0HuQs0O1mYi%2FfiiLSHc5%2F%2B1wk6tUsbFxMKVQFwRO9BvSW&connectionData=[{“Name”:”formsHub”}] 18:43:55.5800651 – b8fd1874-483d-4d89-8a69-c2cfe33cf946 – WS: OnMessage({“C”:”d-5AB67EA2-B,0|C,0|D,1|E,0″,”S”:1,”M”:[]})
18:43:55.5940751 – b8fd1874-483d-4d89-8a69-c2cfe33cf946 – OnError(System.MissingMethodException: Method not found: ‘System.Collections.Generic.IEnumerator`1 Newtonsoft.Json.Linq.JArray.GetEnumerator()‘. at Microsoft.AspNet.SignalR.Client.Transports.TransportHelper.ProcessResponse(IConnection connection, String response, Boolean& shouldReconnect, Boolean& disconnected, Action onInitialized) at Microsoft.AspNet.SignalR.Client.Transports.WebSocketTransport.OnMessage(String message) at Microsoft.AspNet.SignalR.WebSockets.WebSocketHandler.d__e.MoveNext())
18:43:55.6110864 – b8fd1874-483d-4d89-8a69-c2cfe33cf946 – WS: OnClose()

It says something like – I can’t find a method in the Newtonsoft.Json assembly. That’s totally weird as this kind of error should be handled at compile time.

I went looking into Newtonsoft.Json assembly referenced by SignalR 2.0. It correctly references version 5.0.8. The assembly in package folder has the method it was mentioned as missing. Mystery. One thing that caught my eye  while .net reflecting the assembly was its version. While the file version is 5.0.8. the assembly version is, oddly, How come?

Fourth step was looking into modules loaded by my application. They are listed through Visual Studio-Debug/Windows/Modules. Amazingly, Visual Studio was listing Newtonsoft.Json v4.05.8.15203 from … GAC. Not from my package. And by looking at its date it was clear that it was an older version (4.8.2012). Heck, I didn’t even know it was in GAC. I didn’t put it, some other app had to.


From previous Googling I remembered an explanation somewhere that the missing GetEnumerator method was introduced in version 5.0.5. So this was probably it – .net was loading an older version from GAC – that was really missing that method. At this point I knew what was wrong.

Just in case, to make sure, I checked whether the assembly really was in GAC:

C:\Windows\system32>gacutil /l newtonsoft.json
Microsoft (R) .NET Global Assembly Cache Utility.  Version 4.0.30319.18020
Copyright (c) Microsoft Corporation.  All rights reserved.

The Global Assembly Cache contains the following assemblies:
  newtonsoft.json, Version=, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, processorArchi

Number of items = 1

It was.


The proper way would be to have a properly versioned Newtonsoft.Json assembly (those are strong key signed as well). That’s why there is versioning and .net wouldn’t make this confusion. I really wonder why James uses the same assembly version for assemblies that should really have different signatures. Hopefully he will fix this problem in next versions. But until then there is …

… the next best way is to force .net to not load it from GAC.  If the assembly is removed from GAC, .net won’t find the wrong version anymore. See, .net always tries GAC first and only if it doesn’t find a suitable assembly it will go looking elsewhere, like into the folder where your application is. Perhaps I could configure it to load the proper assembly through .config file but this solution is better – it’ll solve the problem unless an older newtonsoft.json is reinstalled again in GAC. Hm.

Removing assembly from GAC should be a rather simple process. Just fire

GACUTIL /U Newtonsoft.Json

and it should be removed. But not this time. Instead I got this warning:

C:\Windows\system32>gacutil /u newtonsoft.json
Microsoft (R) .NET Global Assembly Cache Utility.  Version 4.0.30319.18020
Copyright (c) Microsoft Corporation.  All rights reserved.

Assembly: newtonsoft.json, Version=, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, proces
Unable to uninstall: assembly is required by one or more applications
Pending references:
              SCHEME: <WINDOWS_INSTALLER>  ID: <MSI>  DESCRIPTION : <Windows Installer>
Number of assemblies uninstalled = 0
Number of failures = 0

Basically it is saying that some installed application did install it into GAC and now it is preventing me from removing it from GAC. Uf, nasty. To make it worse, it doesn’t say which application. This article lists the way to “unreference it” to be able to remove it from GAC. Basically you have to remove its entry from the registry and then execute gacutil removal command again.


After registry modification it succeeded.

C:\Windows\system32>gacutil /u newtonsoft.json
Microsoft (R) .NET Global Assembly Cache Utility.  Version 4.0.30319.18020
Copyright (c) Microsoft Corporation.  All rights reserved.

Assembly: newtonsoft.json, Version=, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, proces
Uninstalled: newtonsoft.json, Version=, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, pro
Number of assemblies uninstalled = 1
Number of failures = 0

The aftermath

Removing that old Newtonsoft.Json from registry did the trick. SignalR works like charm again. However, I had to manually remove a component of an unidentified application. And this removal might cause problems with that application in the future.

I really hope that Newtonsoft.Json gets proper versioning to avoid situations like this. This should be a lesson to every library developer out there – do use proper version numbering!. (4.69 mb)


12.11.2013: James, the author, is looking at the possible solution. See