Partially for learning, partially because it might come handy, I decided to build my own Rasbperry PI cluster that would run HypriotOS and Kubernetes. If you search the web you’ll see others doing it and I used them as a knowledge source. Some are outdated and perhaps sharing my experience might help somebody. Anyway, here is my story starting with
- 4x Raspberry PI 3
- 4x 32GB microSD – the faster the better
- 4x network cables
- 4x USB cables
- Anker 5 port USB charger
- Mikrotik hEX router
- partially self-designed, self 3d printed stack (open source)
I’ve decided to go with 4 Raspberries because I have got hEX router which has 5 ports and 4 of them seem enough for experimenting anyway. Make also sure to get short USB and network cables. The later should be flat to consume less space. Those are sadly hard to get in Slovenia, perhaps your best bet is an online shop somewhere (in the EU). Anker is a good USB charger that shouldn’t have problems feeding the hardware but any powerful enough would do. Also if you manage to find an USB powered router, you don’t need second 220V outlet for the router (currently I need two of these – one for the router and the other for the USB power charger) and have instead a short USB cable just like Raspberries do.
The biggest challenges
Getting short and flat network cables wasn’t easy. Online shops outside of Slovenia will help.
Manufacturing and designing the stack that keeps everything together. I’ve based it on an existing one, but enhanced Raspberry holder
and created a compatible holder for both Anker USB charger
and mikrotik hEX
. I missed one thing though – replacing microSD cards is not easy – I’ve ended up using tweezers. If I ever update the design, I’ll definitely make it easier. But overall it is a solid stack and should do the job just fine.
Connecting the beast
Not much here, router and USB charger need to be powered trough an outlet, all Raspberries need both network cable connected to router and USB one to the USB charger and that’s it. Lights will blink and that’s it.
Next post will deal with HypriotOS nad Kubernetes installation.